Why do you need to modify the cigarette lighter and voltmeter

Motorcycle cigarette lighters and voltmeters play an important role in daily riding. Cigarette lighters can not only be used to light cigarettes, but also to charge mobile phones, navigators and other electronic devices; voltmeters can help riders monitor battery status in real time to ensure driving safety. Retrofitting these accessories can bring many benefits, such as improving convenience and safety, and adding a sense of technology to the vehicle. Through examples to show the contrast before and after modification, I believe you will be deeply attracted.

How to choose the right cigarette lighter

When choosing a motorcycle cigarette lighter, there are several key factors to consider: power, interface type, durability, etc. There are many popular and cost-effective cigarette lighter brands and models on the market, such as: Brand A, Brand B and Brand C. Pay attention to the following aspects when purchasing:

• Power: Make sure that the power of the cigarette lighter meets your needs, especially if you often need to charge multiple devices.
• Interface type: Select a cigarette lighter that supports the USB interface to facilitate the connection of various electronic devices.
• Durability: Choose a brand with reliable quality to ensure trouble-free long-term use.

How to choose the right voltmeter

When choosing a motorcycle voltmeter, we mainly focus on several important indicators: measurement range, accuracy, display mode, etc. recommend are several voltmeter brands and models that are well received by riders, such as Brand X, Brand Y and Brand Z. Here are some practical tips for shopping:

• Measurement range: Select a voltmeter that can cover the common voltage range (12V/24V).
• Accuracy: Choose a voltmeter with high accuracy to obtain accurate measurement results.
• Display method: Choose a voltmeter with a backlit display for easy viewing at night.

Cigarette lighter installation steps

The steps to install the motorcycle cigarette lighter are as follows:

1. Preparation: Prepare the required tools, such as screwdriver, insulating tape, etc.
2. Disassemble the original parts: If the original car already has a cigarette lighter, remove it first.
3. Connect the power cord: Connect the positive and negative poles of the cigarette lighter to the power cord of the motorcycle, and be careful not to reverse the positive and negative poles.
4. Fixed position: Choose a suitable position to fix the cigarette lighter to ensure that driving safety will not be affected.
5. Test use: After installation, power on to test whether the cigarette lighter works normally.

Common installation problems and solutions:

• Problem: The cigarette lighter will not start.
  Solution: Check whether the power cord is connected correctly and whether there is an open circuit.
• Problem: The cigarette lighter is very hot.
  Solution: Check whether there is a short circuit, or replace the cigarette lighter with higher power.

Installation steps of voltmeter

The steps to install the motorcycle voltmeter are as follows:

1. Determine the installation location: Choose a location that is easy to view but does not affect driving safety.
2. Connect the power cord: Connect the positive and negative poles of the voltmeter to the power cord of the motorcycle, and be careful not to connect the positive and negative poles.
3. Calibration settings: Calibrate according to the instructions on the manual to ensure accurate measurement results.
4. Fixed installation: Use screws or other fixings to install the voltmeter in the selected position.
5. Test use: After installation, power on to test whether the voltmeter works normally.

Tips when installing:

• Select the appropriate fixing method to ensure that the voltmeter is stable and does not shake.
• Use insulating tape to wrap the power cord to prevent short circuits.

Commissioning and maintenance after modification

After the cigarette lighter and voltmeter are installed, you need to pay attention to the following items:

• Debugging during initial use: Make sure that all connections are correct and the equipment is working properly.
• Daily maintenance method: regularly check whether the power cord is worn to ensure that the connection is firm.